General Mvr Configuration; Figure 61 Mvr - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

21.6 General MVR Configuration

Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source
port for each multicast VLAN. Click Advanced Application and Multicast in the navigation
panel. Click the Multicast Setting link and then the MVR link to display the screen as shown
next.
See Section 21.5 on page 149
You can create up to three multicast VLANs and up to 266 multicast rules on
the switch.
Your switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.

Figure 61 MVR

VES-1616F-3x Series User's Guide
for background information.
Chapter 21 Multicast
151