ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual page 225

Table 81 Command Summary: Configuration Mode (continued)
COMMAND
name-server
route<ip> <mask>
<next-hop-ip>
lacp
system-priority
loginPreceden <LocalOnly |
ce LocalRADIUS |
RADIUSOnly>
logins username <name>
logout
mac-aging- <10-3000>
time
mac-filter name <name> mac <mac-
addr> vlan <vlan-id>
drop <src/dst/both>
mac-forward name <name> mac <mac-
addr> vlan <vlan-id>
interface <interface-
id>
mirror-port
<port-num>
mode zynos
multi-login
mvr <vlan-id>
no bandwidth-control
VES-1616F-3x Series User's Guide
Chapter 32 Introducing the Commands
default-gateway
<ip>
<ip>
[metric <metric>]
[name <name>]
[inactive]
<1-65535>
password <pwd>
privilege <0-14>
inactive
inactive
DESCRIPTION
Sets the default gateway's IP
address.
Sets the IP address of a
domain name server.
Creates a static route.
Sets the metric of a static route
or deactivates a static route.
Enables Link Aggregation
Control Protocol (LACP).
Sets the priority of an active
port using LACP.
Select which database the
switch should use (first) to
authenticate a user.
Configures up to four read-
only login accounts.
Sets the access privilege for
the existing login accounts.
The higher the value, the more
commands are allowed.
Exits from the CLI.
Sets learned MAC aging time.
Configures a static MAC
address port filtering rule.
Disables a static MAC address
port filtering rule.
Configures a static MAC
address forwarding rule.
Disables a static MAC address
forwarding rule.
Enables port mirroring.
Sets a monitor port.
Changes the CLI mode to the
ZyNOS format.
Enables multi-login.
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See Section 32.11.5 on page
236 for more information.
Disable bandwidth control on
the switch.
P
13
13
13
13
13
13
14
14
14
13
13
13
13
13
13
13
13
13
14
13
13
225