Figure 86 Access Control: Logins; Table 65 Access Control: Logins - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can view
but not configure switch settings.
Click Access Control from the navigation panel and then click Logins from this screen.

Figure 86 Access Control: Logins

The following table describes the labels in this screen.

Table 65 Access Control: Logins

LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password
New Password
Retype to confirm Retype your new system password for confirmation
Edit Logins
You may configure passwords for up to four users. These people have read-only access.
User Name
Password
Retype to confirm Retype your new system password for confirmation
Apply
Cancel
VES-1616F-3x Series User's Guide
DESCRIPTION
Type the existing system password (1234 is the default password when
shipped).
Enter your new system password.
Set a user name (up to 30 characters long).
Enter your new system password.
Click Apply to save your changes back to the switch.
Click Cancel to begin configuring this screen afresh.
Chapter 26 Access Control
183