ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual page 228

Chapter 32 Introducing the Commands
Table 81 Command Summary: Configuration Mode (continued)
COMMAND
snmp-server
spanning-tree
ssh
storm-control
syslog
timesync
trunk <T1>
vdsl-alarmprofile
vdsl-profile
vdsl-psd profile
228
ssh
telnet
trap-destination
<ip>
<port-list>
key <rsa1|rsa|dsa>
known-hosts
known-hosts <host-
ip>
known-hosts <host-
ip> [1024|ssh-
rsa|ssh-dsa]
server <ip-
address>
server <ip-
address> inactive
type <type>
interface <port-
list>
lacp
<profile-name>
<profile-name>
<profile-name>
VES-1616F-3x Series User's Guide
DESCRIPTION
Disables SSH (Secure Shell)
server access to the switch.
Disables telnet access to the
switch.
Disables sending of SNMP
traps to a station.
Disables (R)STP.
Disables (R)STP on the
specified ports.
Disables the secure shell
server encryption key. Your
switch supports SSH versions
1 and 2 using RSA and DSA
authentication.
Removes all remote hosts.
Removes the specified remote
hosts from the list of all known
hosts.
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
Disables broadcast storm
control.
Disables syslog logging.
Disables syslog logging to the
specified syslog server.
Enables syslog logging to the
specified syslog server.
DIsables syslog logging for the
specified log type ( sys ,
link , config , error or
report ).
Removes the time server
protocol.
Disables port group trunking.
Removes ports from the trunk
group.
Disables LACP in the trunk
group.
Removes a VDSL alarm
profile. You cannot delete a
default profile (DEFVAL).
Removes a VDSL profile. You
cannot delete a default profile
(DEFVAL).
Removes a VDSL PSD profile.
You cannot delete a default
profile (DEFVAL).
P
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13