ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual page 222

Chapter 32 Introducing the Commands
Table 80 Command Summary: Enable Mode (continued)
COMMAND
vdsl-psdprofile
vlan
vlan1q
vlan-stacking
ssh <1|2> <[user@]dest-
ip>
traceroute <ip|host-name>
vdsl <port- remote-reset
list>
remote-test
reset
retrain
write memory
222
DESCRIPTION
Displays settings of the specified
<profile-name>
VDSL profile.
Displays a summary list of VDSL PSD
profiles.
Displays settings of the specified
<profile-name>
VDSL PSD profile.
Displays the status of all VLANs.
Displays the status of the specified
<vlan-id>
VLAN.
Displays GVRP settings.
gvrp
Displays VLAN-based port isolation
port-isolation
settings.
Displays VLAN stacking settings.
Connects to an SSH server with the
specified SSH version.
Connects to an SSH server with the
<command </>>
specified SSH version and addition
commands to be executed on the
server.
Determines the path a packet takes to
a device.
Determines the path a packet takes to
[<vlan-id>][ttl
a device in the specified VLAN.
<1-255>] [wait
<1-60>] [queries
<1-10>]
Resets the connection information
and settings on the remote CPE
device(s).
Sets the port(s) to test the connection
to the remote CPE device(s).
Clears port statistics and connection
information. This re-initializes the
connection.
Sets the port(s) to establish the
connection again.
Saves current configuration to the
configuration file the switch is
currently using.
VES-1616F-3x Series User's Guide
P
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13