Figure 19 System Info; Table 9 System Info - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 6 Basic Setting

Figure 19 System Info

The following table describes the labels in this screen.

Table 9 System Info

LABEL
System Name
OS F/W
Version
Modem Code
F/W Version
Ethernet
Address
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
Fan Speed
(RPM)
64
DESCRIPTION
This field displays the descriptive name of the switch for identification purposes.
This field displays the version number of the switch 's current firmware including the
date created.
This field displays the version number of the switch 's current VDSL modem code
version.
This field refers to the Ethernet MAC (Media Access Control) address of the switch.
The switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit) in this field.
IFE8, Switch and ADT7463 refer to the location of the temperature sensors on the
circuit board.
This shows the current temperature in degrees centigrade at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for those
above.
If Error displays, check that the fans are working and make sure that you do not
block ventilation holes on the switch.
A properly functioning fan is an essential component (along with a sufficiently
ventilated, cool operating environment) in order for the device to stay within the
temperature threshold. Each fan has a sensor that is capable of detecting and
reporting if the fan speed falls below the threshold shown.
VES-1616F-3x Series User's Guide