Chapter 32 Introducing the Commands
sysname> ?
enable
exit
help
history
logout
ping
show
ssh
traceroute
sysname>
32.5.2 Detailed Command Information
Enter
<command> help
Enter
<command> ?
parameters.
sysname> ping help
Commands available:
ping <ip>
<
[ in-band|out-of-band|vlan <vlan-id> ]
[ size <0-1472> ]
[ -t ]
>
sysname>
sysname> ping ?
<ip|host-name>
help
sysname>
32.6 Changing the Password
This command is used to change the password for Enable mode. By default the same password
is used to enter the command line interface (CLI) and Enable and Config modes of the CLI.
The password you change with this command is required to enter Enable and Config modes of
the CLI.
Syntax:
password <password>
where
<password>
214
Turn on privileged commands
Exit from the EXEC
Description of the interactive help system
Show a list of previously run commands
Exit from the EXEC
Exec ping
Show system information
SSH client
Exec traceroute
to display detailed sub command and parameters.
to display detailed help information about the sub commands and
destination ip address
Description of ping help
=
Specifies the new password (up to 32 alphanumeric
characters) users have to type in to enter Enable and Config
modes.
VES-1616F-3x Series User's Guide