Remote Device Upgrade; Figure 76 Reboot System: Start; Figure 77 Maintenance: Remote Device Upgrade - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

2 Click OK to display the screen shown next.

Figure 76 Reboot System: Start

3 Click OK again and then wait for the switch to restart. This takes up to two minutes.
This does not affect the switch's configuration.

25.4 Remote Device Upgrade

The switch allows you to perform remote firmware upgrade on the connected CPE device(s).
Click Management and Maintenance, then click the Click Here link next to Remote Device
Upgrade to display the screen as shown next.
Be sure to upload the correct model firmware as uploading the wrong model
firmware may damage the device.

Figure 77 Maintenance: Remote Device Upgrade

Follow the steps below to perform remote firmware upgrade on the CPE devices connected to
the switch.
1 Download the latest firmware for the CPE device from www.zyxel.com and save it on a
computer connected to the switch.
VES-1616F-3x Series User's Guide
Chapter 25 Maintenance
171