Table of Contents
Advertisement
Chapter 7 VLAN
Table 19 VLAN > Static VLAN (continued)
LABEL
Cancel
Clear
VID
Active
Name
Delete
Cancel
7.5.3 Configure VLAN Port Setting
To configure the VLAN settings on a port, click the VLAN Port Setting link in the VLAN
Status screen. Refer to
Figure 32 VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 20 VLAN > VLAN Port Setting
label
GVRP
Port Isolation
Port
Ingress Check
PVID
92
DESCRIPTION
Click Cancel to reset the fields.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
Section 7.1 on page 87
description
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a
way for switches to register necessary VLAN members on ports across the
network.
Select this check box to permit VLAN groups beyond the local switch.
Port Isolation allows each port to communicate only with the CPU management
port and the uplink ports but not communicate with each other. This option is the
most limiting but also the most secure.
This field displays the port number.
Select this check box to discard incoming frames for VLANs that do not have this
port as a member.
Clear this check box to disable ingress filtering.
Enter a number between 1and 4094 as the port VLAN ID.
for background information.
VES-1616F-3x Series User's Guide
Advertisement
Table of Contents
Troubleshooting
