Figure 7-3 Configuration: Adsl Line: Profile Setup; Table 7-2 Configuration: Adsl Line: Profile Setup - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
The following table describes the labels in this screen.
LABEL
All Profiles
Channel Mode
Interleave Delay
Upstream (ATU-R)
Downstream (ATU-C)
Min Tx Rate
Max Tx Rate
7-4

Figure 7-3 Configuration: ADSL Line: Profile Setup

Table 7-2 Configuration: ADSL Line: Profile Setup

This field lists the profile names for all profiles configured.
DEFVAL is the default profile.
This field displays the ADSL latency mode for the ports that belong to this profile.
fast mode uses no interleaving and provides faster transmission (a "fast channel"). This
would be suitable if you have a good line where little error correction is necessary.
interleave mode uses interleave delay when transmission error correction (Reed-
Solomon) is necessary due to a less than ideal telephone line.
This field displays the number of milliseconds (1-255) of interleave delay to use for
upstream/downstream transfers.
ATU-R (ADSL Termination Unit-Remote) refers to the channel for traffic coming to the IES
from the subscriber (upstream).
ATU-C (ADSL Termination Unit-Central) refers to the channel for traffic going from the IES
to the subscriber (downstream).
This field displays the minimum transmission speed in kilobits per second (Kbps).
This field displays the maximum transmission speed in kilobits per second (Kbps).
DESCRIPTION
The Configuration Menus