No Port-Access-Authenticator; No Ssh - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 33 Command Examples

33.8.4 no port-access-authenticator

Syntax:
no port-access-authenticator
no port-access-authenticator <port-list> reauthenticate
no port-access-authenticator <port-list>
where
<port-list>
reauthenticate
<port-list>
An example is shown next.
• Disable authentication on the switch.
• Disable re-authentication on ports one, three, four and five.
• Disable authentication on ports one, six and seven.
sysname(config)# no port-access-authenticator
sysname(config)# no port-access-authenticator 1,3-5 reauthenticate
sysname(config)# no port-access-authenticator 1,6-7

33.8.5 no ssh

Syntax:
no ssh key <rsa1|rsa|dsa>
no ssh known-hosts <host-ip>
no ssh known-hosts <host-ip> [1024|ssh-rsa|ssh-dsa]
where
key <rsa1|rsa|dsa>
known-hosts <host-ip>
known-hosts <host-ip>
[1024|ssh-rsa|ssh-dsa]
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
252
= Disables port authentication on the switch.
= Disables the re-authentication mechanism on the listed port(s).
= Disables authentication on the listed ports.
Disables the secure shell server encryption key. Your switch
supports SSH versions 1 and 2 using RSA and DSA
authentication.
Remove specific remote hosts from the list of all known
hosts.
Remove remote known hosts with a specified public key
(1024-bit RSA1, RSA or DSA).
VES-1616F-3x Series User's Guide