Chapter 29 Cluster Management
The following table explains some of the FTP parameters.
Table 74 FTP Upload to Cluster Member Example
FTP PARAMETER
User
Password
ls
360AIH0.bin
fw-00-13-49-00-00-01
config-00-13-49-00-00-01 This is the cluster member switch's configuration file name as seen
29.3 Configuring Cluster Management
Click Configuration from the Cluster Management screen to display the next screen.
Refer to
Section 29.1 on page 197
Figure 104 Clustering Management Configuration
200
DESCRIPTION
Enter "admin".
The web configurator password default is 1234.
Enter this command to list the name of cluster member switch's
firmware and configuration file.
This is the name of the firmware file you want to upload to the
cluster member switch.
This is the cluster member switch's firmware name as seen in the
cluster manager switch.
in the cluster manager switch.
for more information.
VES-1616F-3x Series User's Guide