Restoring Configuration; Resetting To The Factory Default - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 33 Command Examples
where
<ip>
<remote-file>
This command backs up the current configuration file on a TFTP server. The following
example backs up the current configuration to a file (
(
172.23.19.96
sysname# copy running-config tftp 172.23.19.96 test.cfg
Backuping
. (683)Bytes Done!
sysname#

33.7.2 Restoring Configuration

Syntax:
copy tftp config <index> <ip> <remote-file>
where
<index>
<ip>
<remote-file>
This command restores a configuration file on the switch. The following example uploads the
configuration file (
sysname# copy tftp config 1 172.23.19.96 test.cfg
Restoring
. (683)Bytes Done!
sysname#

33.7.3 Resetting to the Factory Default

Follow the steps below to reset the switch back to the factory defaults.
1 Enter
2 Enter
The following example resets both configuration files to the factory default settings.
sysname# erase running-config
sysname# write memory
250
The IP address of a TFTP server on which you want to store the
=
backup configuration file.
Specifies the name of the configuration file.
=
).
Specifies to restore which configuration file (1) on the Switch.
=
The IP address of a TFTP server from which you want to get the
=
backup configuration file.
Specified the name of the configuration file.
=
) from the TFTP server (
test.cfg
erase running config
to save the changes to the current configuration file.
write memory
) on the TFTP server
test.cfg
172.23.19.96
to reset the current running configuration.
VES-1616F-3x Series User's Guide
) to the switch.