Show Ip; Show Logging; Show Mac Address-Table All - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 33 Command Examples

33.2.2 show ip

Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all
switch interfaces.
The following figure shows the default interface settings.
sysname> show ip
Out-of-band Management IP Address = 192.168.0.1
Management IP Address
IP[192.168.0.1], Netmask[255.255.255.0], VID[0]
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]

33.2.3 show logging

Syntax:
show logging
This command displays the system logs. The following figure shows an example.
sysname# show logging
56 Thu Jan
57 Thu Jan
58 Thu Jan
59 Thu Jan
60 Thu Jan
61 Thu Jan
62 Thu Jan
63 Thu Jan
Clear Error Log (y/n):
If you clear a log (by entering
it again.

33.2.4 show mac address-table all

Syntax:
show mac address-table all <sort>
Where
<sort>
244
1 00:01:04 1970 PSSV -WARN
1 00:01:04 1970 PSSV
1 00:01:04 1970 PP1f -WARN
1 00:01:06 1970 PKEB
1 00:02:46 1970 PP0c -WARN
1 00:02:46 1970 PP0c
1 00:03:23 1970 PP27
1 00:03:28 1970 PKEB
at the
y Clear Error Log (y/n):
= Specifies the sorting criteria (MAC, VID or port).
SNMP TRAP 0: cold start
WARN System cold start
SNMP TRAP 26: Event On Trap
INFO User admin login
SNMP TRAP 3: port 18 link up
ERROR Port 18 link up
INFO User admin logout
INFO User admin login
prompt), you cannot view
VES-1616F-3x Series User's Guide