Configuring Radius Server Settings; Figure 47 Port Authentication > Radius; Table 36 Port Authentication > Radius - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

15.2.2 Configuring RADIUS Server Settings

From the Port Authentication screen, click RADIUS to display the configuration screen as
shown.
Use this screen to configure RADIUS server settings. See
background information.
Figure 47 Port Authentication > RADIUS
The following table describes the labels in this screen.
Table 36 Port Authentication > RADIUS
LABEL
Authentication Server
IP Address
UDP Port
Shared Secret
Apply
Cancel
VES-1616F-3x Series User's Guide
DESCRIPTION
Enter the IP address of the external RADIUS server in dotted decimal notation.
The default port of the RADIUS server for authentication is 1812. You need not
change this value unless your network administrator instructs you to do so.
Specify a password (up to 32 alphanumeric characters) as the key to be shared
between the external RADIUS server and the switch. This key is not sent over the
network. This key must be the same on the external RADIUS server and the switch.
Click Apply to save your changes back to the switch.
Click Cancel to begin configuring this screen afresh.
Chapter 15 Port Authentication
Section 15.1 on page 117 for
119