Attaching The Mounting Brackets To The Switch; Mounting The Switch On A Rack; Figure 3 Attaching The Mounting Brackets; Figure 4 Mounting The Switch On A Rack - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 2 Hardware Installation

2.1.2 Attaching the Mounting Brackets to the Switch

1 Position a mounting bracket on one side of the switch, lining up the four screw holes on
the bracket with the screw holes on the side of the switch.

Figure 3 Attaching the Mounting Brackets

2 Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting
bracket holes into the switch.
3 Repeat steps
switch.
4 You may now mount the switch on a rack. Proceed to the next section.

2.1.3 Mounting the Switch on a Rack

1 Position a mounting bracket (that is already attached to the switch) on one side of the
rack, lining up the two screw holes on the bracket with the screw holes on the side of the
rack.

Figure 4 Mounting the Switch on a Rack

2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting
bracket holes into the rack.
3 Repeat steps
36
1 and 2 to install the second mounting bracket on the other side of the
1 and 2 to attach the second mounting bracket on the other side of the rack.
VES-1616F-3x Series User's Guide