Using Command History - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 32 Introducing the Commands
Table 78 Command Interpreter Mode Summary (continued)
.
MODE DESCRIPTION
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
config-vdsl- This is a sub-mode of the config mode
alarmprofile and allows you to configure VDSL
alarm profiles..
config-vdsl-profile This is a sub-mode of the config mode
and allows you to configure VDSL
profiles.
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.

32.9 Using Command History

The switch keeps a list of command(s) you have entered for the current CLI session. You can
use any commands in the history again by pressing the up ( ) or down ( ) arrow key to scroll
through the previously used commands and press
the list of commands.
sysname> history
enable
exit
history
sysname>
216
HOW TO LOGIN/
PROMPT
ACCESS
interface
Type
sysname(config-
port-channel
interface)#
followed by a port
number. For example,
nterface port-
i
channel 10 to
configure port 10 on
the switch.
MVR
To enter mode,
sysname(config-mvr)#
enter mvr followed by
a VLAN ID (between 1
and 4094). For
mvr 2
example, enter
to configure multicast
settings on VLAN 2.
Type vlan-
sysname(config-
alarmprofile
vdslalarmprofile)#
followed by a profile
name. For example,
vdsl-
alarmprofile
test .
vlan-
Type
sysname(config-
profile followed by
vdslprofile)#
a profile name. For
example, vdsl-
profile
standard .
vlan
Type followed
sysname(config-vlan)#
by a number (between
1 and 4094). For
example, vlan 10 to
configure settings for
VLAN 10.
. Use the history command to display
[ENTER]
VES-1616F-3x Series User's Guide