marposs TESTAR Quick read M Installation And User Manual page 40

ENGLISH
( continue ...)
( continue ...)
Quick Quick
40 Quick Quick read M
CHOICE
Choice of the measurement type:
- static (hold; static)
- dynamic [Max; min; M-m; (M+m)/2; (M-m)/2]
CHOICE
Choice of the full scale value of the analog display.
CHOICE
Choice of the pretravel check on/off for the
transducer 1.
Programming of the pretravel limit value. If
VALUE
M.RESOL = high, the value is programmed with
0,0001 mm resolution. If M.RESOL = low, the
value is programmed with 0,001 mm resolution.
Choice of the pretravel check on/off for the
CHOICE
transducer 2. This variable appears in the main
menu only if PROBE=Probe 1&2.
Programming of the pretravel limit value. If
VALUE
M.RESOL = high, the value is programmed with
0,0001 mm resolution. If M.RESOL = low, the
value is programmed with 0,001 mm resolution.
VALUE
Programming of the multiplying coefficient of the
transducer signal 1.
Step 0,01
Programming of the multiplying coefficient of the
VALUE
transducer signal 2. This variable appears in the
main menu only if PROBE=Probe 1&2.
Step 0,01
Tabella 5