Embedded Use; Hardware Connections; Working With Smartbeat™ Avd Studio To Program Public Address System; Figure 10: Segger J-Link Debugger Connection To Carrier Board - Renesas DA14AVDDECTDEVKT User Manual

UM-D-005
DA14AVDDECTDEVKT Quick Start Guide
5

Embedded Use

This section explains how users can reprogram the AVD module to a Public Address (PA) system or
a voice conferencing system using the Smartbeat
TM
Smartbeat AVD studio, refer to the Smartbeat
5.1

Hardware Connections

Connect the carrier board and J-Link Lite debugger to your PC as shown in
TM
SmartBeat AVD Studio can access the target via the Serial Wire Debug (SWD) Interface.

Figure 10: Segger J-Link Debugger Connection to Carrier Board

Working with Smartbeat™ AVD Studio to Program Public Address
5.2
System
TM
1. Once the Smartbeat
Figure 11, the folder to be selected is called "Workspace_AVD").

Figure 11: Select Workspace in Smartbeat

2. Create a project by clicking File > New > Smartbeat WAM Project
User Manual
CFR0012
TM
TM
AVD Studio User Manual ([1]).
AVD Studio is started up, provide the location of the AVD workspace (see
Revision 1.2
12 of 22
AVD Studio. To see how to install the
Figure
TM
AVD Studio
(Figure
10, so the
12).
18-Jan-2021
© 2022 Renesas Electronics