Figure 12: Configure Da16600 Evb For At Command - Uart/Spi With External Mcu; Table 12: Configure Da16200 Evb Switch For At Command - Uart/Spi With External Mcu; Table 13: Configure Da16200 Evb Connector For At Command - Uart/Spi With External Mcu; Table 14: Configure Da16600 Evb Switch For At Command - Uart/Spi With External Mcu - Renesas DA16200 User Manual

Hide thumbs Also See for DA16200:

Getting started manual (99 pages)

User manual (83 pages)

Quick start manual (10 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

Table of Contents

UM-WI-056

DA16200 DA16600 FreeRTOS Getting Started Guide

Table 12: Configure DA16200 EVB Switch for AT Command - UART/SPI with External MCU

SW1

SW2

All OFF

Table 13: Configure DA16200 EVB Connector for AT Command - UART/SPI with External MCU

Interface

AT Command over UART

AT Command over SPI

Figure 12, Table 14

and

the UART or SPI interface using an external MCU. This configuration connects UART2 or SPI of the

DA16600 (GPIOC6/7 for UART or GPIOA2/3/8/9 for SPI) to the external pinout connectors.

When using an AT command over UART, Pin 11 of J3 and Pin 12 of J3 should be connected by a

jumper pin for BLE-Wi-Fi COEX. Also, when using an AT command over SPI, Pin 13 of J3 and Pin

14 of J3 should be connected.