Tools Required; Assembly - Keysight N1913B EPM Series Service Manual

6 Repair Guide

Tools Required

Assembly

Item
Front Panel Sensor Cable Assembly
Semi-Rigid Cable Assembly (Option: C03)
P700 board installation to carrier board
P700 Carrier Board Installation on Motherboard
Deck Assembly
Power Supply/Power Supply Cover
Rear Panel Sensor Assembly
(Option: C02,C03)
Rear Panel Calibrator Assembly
(Option: C03)
Trigger In and Out Assembly
Rear USB Assembly
VGA Assembly
Carrier Board SMB connector installation at Rear
Panel
Motherboard GPIB installation at Rear Panel
Motherboard Installation
Semi Rigid Cable Assembly Installation
(Option: C03)
Ground Cable Assembly
GROUNDING AT REAR PANEL
102
Description/Default
Circlip Pliers
Flat Head Screwdriver
Long nose pliers
Heat Blower
5/16" Break Spanner
Electrical torque driver, T8 bit
Electrical torque driver, T8 bit
Electric Torque Driver, Bit T20
Manual Torque Driver, Bit T10
Circlip Pliers
Flat Head Screwdriver
Long nose pliers
Manual Torque 9/16" socket
Flat Head Screwdriver
Long nose pliers
Manual Torque Driver 9/16" Socket
Electric torque driver T10
Manual Torque Driver 3/16" socket
Manual Torque Wrench with ¼" Socket
Manual Torque Driver 9/32" socket
Electrical Torque Driver T20 bit
5/16" Break Spanner
Electric Torque Driver, Bit T20
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Range of values
NA
10lbs-in
5lbs-in
5lbs-in
15lbs-in
7 lbs-in
21lbs-in
NA
NA
18lbs-in
6lbs-in
6lbs-in
7lbs-in
6lbs-in
15lbs-in
10lbs-in
15lbs-in