Table of Contents
Advertisement
6
Repair Guide
Front Panel Disassembly Instructions
– The front panel assembly should only be repaired in a clean and dust-free
CAUTION
– Failure to do so may introduce contamination between the EMI shielded
– Also note that it may not be necessary to completely disassemble the
Instructions
Step 1
Use C-clip pliers to remove sensor flex assembly.
Release the tab holding the flex cable to the display interface
board, and then disconnect it.
Step 2
Disconnect the white plastic plug from the display interface
board.
Step 3
Unlock the main plastic clip that holds the front panel
sub-frame and display support molding together (situated
beside the key flex circuit), and carefully pull them apart to
separate them.
128
environment.
window and the display.
front panel in order to repair or replace some of its parts. As such, this
procedure should be tailored to suit the specific repair requirements.
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Visual
Advertisement
Table of Contents
