Keysight N1913B EPM Series Service Manual page 89

P700 Processor IO Module and P700 Carrier
Keysight part number
– N1913-66509
(Tested Single
Processor and IO
Module PCA- SPO KIT)
– N1914-66507
(Tested Dual Processor
and IO Module PCA-
SPO KIT)
- N1914-66509
(PCA, P700 Carrier
Board- SPO KIT)
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Description
Note:
– N1913-66509 (Tested Single Processor
and IO Module PCA - SPO KIT) comes
pre-programmed with N1913B firmware
– N1914-66507 (Tested Dual Processor and
IO Module PCA - SPO KIT) comes
pre-programmed with N1914B firmware
– Refurbished P700 Processor Module and
P700 Carrier Board are not available
– The P700 Processor IO Module must be
programmed once it has been installed
(see"Replacing the Carrier Board"
page 137)
– Ribbon Cable 8121-1076 is supplied
separately
Visual
N1913-66509/ N1914-66507
on
N1914-66509
Repair Guide 6
89