Table of Contents
Advertisement
Repair Guide
6
Instructions
Visual
Step 11
Fit the split washer to the calibrator assembly.
Step 12
Attach the display to the display interface board using the four
screws removed earlier.
Step 13
Connect the white plastic plug to the display interface board.
Step 14
Attach the front panel sub-frame to the display support
molding, ensuring that all plastic clips are engaged to hold it
securely.
Step 15
Connect the flex cable to the display interface board, and then
tighten the locking tab.
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
135
Advertisement
Table of Contents
