Keysight N1913B EPM Series Service Manual page 93

Customization details (Rear Panel Assembly)
The standard EPM Series Power Meters has an input sensor connector(s) and a
reference calibrator connector on the front panel. Option C03 is available to move
the input sensor connector(s) and reference calibrator connector to the rear panel.
Below are the customization details on the rear panel assembly.
Connector option
N1913B-C01 (Front calibrator,
front sensor)
N1913B-C02 (Front calibrator,
parallel front and rear sensor)
N1913B- C03 (Rear calibrator,
parallel front and rear sensor)
N1914B-C01 (Front calibrator, 2 front
sensor)
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Details
1x Recorder Output Cable
1x Plug-hole (BNC)
2x Plug-hole (Sensor)
1x Plug-hole (Calibrator)
1x Power Sensor Cable Assembly - Rear
1x Recorder Output Cable
1x Plug-hole (BNC)
1x Plug-hole (Sensor)
1x Plug-hole (Calibrator)
1x Power Sensor Cable Assembly - Rear
1x Recorder Output Cable
1x Adapter RF N-SMA
1x Lock Washer
1x Spring Washer
1x Hex Nut
1x Plug-hole (BNC)
1x Plug-hole (Sensor)
2x Recorder Output Cable
2x Plug-hole (Sensor)
1x Plug-hole (Calibrator)
Repair Guide 6
Part number
E4418-61015
6960-0081
6960-0024
6960-0178
N1913-67301
E4418-61015
6960-0081
6960-0024
6960-0178
N1913-67301
E4418-61015
E4418-20009
E4418-00016
3050-0916
2950-0132
6960-0081
6960-0024
E4418-61015
6960-0024
6960-0178
93