Figure 6-8 Disconnect The Semi-Rigid Cable; Figure 6-9 Remove The Front Panel - Keysight N1913B EPM Series Service Manual

Instructions
Disconnect the semi-rigid cable
Note:
This only applies to option C03. Use 5/16'' spanner with 10
Ibs/In to disconnect semi rigid cable from N-type connector at
rear panel.
Remove the front panel (Figure
the front panel assembly.
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
(Figure 6-8).
6-9). Carefully lift and remove
Visual
Figure 6-8 Disconnect the semi-rigid cable
Figure 6-9
Remove the front panel
Repair Guide 6
109