Tools Required
Table 4-8
Tools required
Tool
5/16" open-end wrench, 5 in-lbs
Glue gun
9/32 socket, 5 in-lbs (for earth wire)
Manual T10 Torx screwdriver
Philips 12 in-lbs power driver
Philips 5 in-lbs power driver
Customized socket for power reference
connector
Special tooling kit (N1912-61807)
Keysight 8990B Service Guide
Function
Attach the attenuator pad on the check source
assembly
Attach the jumper of the 08990-61614 on the
power supply module (0950-5060)
Attach the earth wires (nut)
Fix the screw on the top cover and attach the PCA
Fit the screws on the power supply module (red
and black wires)
Fit the screws on the CPU fan
Fit the nut at the front panel N-type connector
Fit the sensor connector
Repair Guide
Item
4
95