Table of Contents
Advertisement
6
Repair Guide
Disassembly Instructions
The guidelines in this section describe the disassembly of the major assembling in
the Keysight N1913B and N1914B power meters.
Instructions
This procedure focuses primarily on model N1913B and
N1914B (i. e. dual channel, with front panel sensor and power
reference connectors)
– Remove the handle. Rotate it to the vertical position. Pull
both sides outwards from the body of the unit.
– Remove the front/rear bumpers: Pull one side of the bumper
outwards to disengage it. Pull it away from the unit.
– Separate the clamshells
screwdriver bit to loosen the four captive screws.
104
(Figure
6-1): Use the T20 Torx
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Visual
Figure 6-1
Separate the clamshells
N1913B
N1914B
Advertisement
Table of Contents
