Input And Output Connectors; Figure 197 Rear Panel Of The Agilent 8163B Lightwave Multimeter System; Figure 198 Rear Panel Of The Agilent 8164B Lightwave Measurement - Agilent Technologies 8163A Manual
Lightwave multimeter
Hide thumbs
Also See for 8163A:
- Manual (466 pages) ,
- User manual (446 pages) ,
- Programming manual (274 pages)
Table of Contents
Advertisement
Installation and Maintenance
CAU T ION
310
All manuals and user guides at all-guides.com
Input and Output Connectors
There are three BNC connectors on the rear panel of your instrument.
These are the Remote Interlock, the Trigger Out and the Trigger In
connectors.
There are two input BNC connectors: the Remote Interlock Connector and
the Trigger Input, see Figure 197 or Figure 197 . These are TTL inputs. A
maximum of 5 V can be applied as an external voltage to either of these
input connectors.
There is one output BNC connector: the Trigger Output, see Figure 197 or
Figure 197 . This is a TTL output. Do not apply an external voltage to this
connector.
Figure 197 Rear Panel of the Agilent 8163B Lightwave Multimeter System
Figure 198 Rear Panel of the Agilent 8164B Lightwave Measurement System
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
Input and Output Connectors
Hide quick links:
Advertisement
Table of Contents
