What You Will Find In This Chapter - Agilent Technologies N9039A Service Manual

Post-Repair Procedures

What You Will Find in This Chapter

What You Will Find in This Chapter
This chapter provides information that will enable you to return an instrument to
full operation following the replacement or repair of any instrument assembly.
This information includes a table that shows which adjustments and/or
performance tests must be executed after replacing an assembly, as well as
instructions for performing a few manual post-repair procedures.
The following sections are located in this chapter:
To determine which Performance Verification/Adjustment Software tests to
perform, refer to
If one or more instrument assemblies have been replaced, related adjustment or
NOTE
configuration procedures must be performed prior to verifying that the instrument
meets specifications. Refer to
after replacing an assembly.
Never perform adjustments as routine maintenance. Adjustments should only be
NOTE
performed after a repair or a performance test failure.
If the indications received during a procedure execution do not agree with the
NOTE
normal conditions given in the procedure, a fault exists in the instrument. The fault
should be repaired before proceeding with any further procedures. Refer to the
troubleshooting information in
214
Before Starting ..................................................................................
Required Test Equipment
Post-Repair Procedures
Calibration File Backup
BIOS Setup Changes .........................................................................
Changing BIOS Settings
Accept End-User License Agreement (EULA)
Programming Model and Serial Numbers
License Key Backup and Restoring
Table 8-1
..................................................................
.....................................................................
....................................................................
..............................................................
.................................
.........................................
..................................................
in this chapter.
Table 8-1 to determine which procedures to perform
Chapter 2 of this guide.
page 215
page 215
page 216
page 218
page 219
page 219
page 225
page 231
page 232
Chapter 8