Power Supply Assembly; Removal - Agilent Technologies N9039A Service Manual

Assembly Replacement Procedures

Power Supply Assembly

Power Supply Assembly

Removal

1. Remove the instrument outer case. Refer to the
2. Remove the rear panel. Refer to the
3. Remove the top brace. Refer to the
4. Refer to
5. Remove the processor assembly. Refer to the
6. The power supply assembly can be removed from the chassis by pulling
Figure 7-11 Power Supply Assembly Removal
176
procedure.
Figure 7-11. Remove the screws (2) and (3) attaching the power
supply brace (1) to the chassis and power supply (4).
procedure.
straight out the back.
Instrument Outer Case
Rear Panel removal procedure.
Top Brace removal procedure.
Processor Assembly
removal
removal
Chapter 7