Midplane Bracket - Agilent Technologies N9039A Service Manual

Midplane Bracket

Removal and Replacement
1. To remove the midplane bracket at this point, refer to
screws (1) attaching the midplane board assembly to the chassis.
2. To replace the midplane bracket, position it into the chassis and reattach the
screws, refer to
Figure 7-20 Midplane Bracket Removal (bottom view)
Chapter 7
Figure 7-20. Torque to 9 inch-pounds.
Assembly Replacement Procedures
Midplane Board Assembly
Figure 7-20. Remove the
189