Table of Contents
Advertisement
Replacing a Fan
1. Refer to
rivets (3) that attach the fan (1) and guard (2) to the fan bracket (4). To do
this use a small screwdriver to unscrew the rivet and remove it from the
bracket.
Figure 7-26
Fan Replacement
2. Position the new fan on the work surface with the arrows pointing to the right
and down.
3. Orient the fan guard so that the rings are on the outside, and that the "V" of the
support legs are pointing to the neighboring fan.
4. With the rivets center posts raised, snap the rivets into place through the fan
grill and fan bracket and into the fan. Screw the center posts into place.
Chapter 7
Figure
7-26. To replace a fan, it is necessary to remove the 4 plastic
Assembly Replacement Procedures
Fan Assembly
201
Advertisement
Table of Contents
Troubleshooting
