Quantum LTO 2 User Manual page 80

LTO-2 SCSI Interface Guide
Field Bytes
Port A 12
Transport
Type
Port A 15
Selection
ID
Operating 20-23
Hours
Since
Manufac-
ture
Initiator ID 24-31
Cartridge
Serial
32-63
Number
Reserved
a.As there is only one LTO format defined at this time, the Cartridge
Format value is always zero. During insertion, data cartridge type is
unknown between the time the cartridge is seated and the drive
completes winding to BOT; the length calculation takes place during
winding.
Bits Description
0 = Port A link is down.
3 = Parallel SCSI Ultra-160 interface
The SCSI ID to which the drive
responds.
Total number of hours of head-tape
contact time.
Identification of the initiator holding a
reservation on the drive, when the Unit
Rsvd field is 1. The least-significant
byte contains the initiator's SCSI ID. If
Unit Rsvd is zero, then this field is
zero.
32 bytes of ASCII data, right-filled with
blanks. This is the cartridge serial
number as defined by attribute
number 0201h of the SPC-2
command (the
ATTRIBUTE
command is not
ATTRIBUTE
supported).
Always 0.
Chapter 2 SCSI Commands
INQUIRY Command
READ
READ
56