Quantum LTO 2 User Manual page 422

Status Name
SRV_CMDPROC_TAPE_NOT_
MOVING_FOR_RAMP_HEAD_
COMMAND
SRV_CMD_INVALID_HEAD_
POSITION_SPECIFIED_IN_
CHANGE_TRACKING_MODE
SRV_CMD_INVALID_HEAD_
POSITION_SPECIFIED_IN_WRAP_
RESTART_TRACKING
SRV_MOVETAPE_SET_LC_
NOTIFICATION_FAILED
SRV_CMDPROC_REJ_TAPE_NOT_
READY
SRV_STEP_HEAD_EXPECTING_
MOVING_UP_WITH_ADDED_
HYSTERESIS_AFTER_REFERENCE_
SENSOR_HIGH
SRV_CMD_INVALID_COMMAND_
CALLED_SEQUENCE_IS_NULL
SRV_TIMEOUT_DURING_HEAD_
STEPPER_STOPPING_AFTER_
SEARCHING_FOR_SERVO_BAND
SRV_TIMEOUT_DURING_HEAD_
STEPPER_MOVING_UP_WITH_
ADDED_HYSTERESIS_AFTER_
REFERENCE_SENSOR_HIGH
SRV_STEP_HEAD_EXPECTING_
SEARCHING_FOR_SERVO_BAND
LTO-2 SCSI Interface Guide
Sense
Key Category
627h Servo
628h Servo
629h Servo
62Ah Servo
62Bh Servo
62Ch Servo
62Dh Servo
62Eh Servo
62Fh Servo
630h Servo
Appendix A Message Codes
Description
command rejected
RAMP HEAD
Head position not a valid tracking
head position
Head position not a valid tracking
head position for restart tracking
Attempt to set linear counter mark
failed since already past point
Tape ready for retension
Expecting moving up with added
hysteresis after reference sensor high
Invalid command called or invalid
message sent to sequencer
Timeout during head stepper
stopping after searching for servo
bundle
Timeout during head stepper moving
up with added hysteresis after
reference sens
Expecting searching for servo bundle
398