Quantum LTO 2 User Manual page 389

Status Name
SRV_FAILURE_DURING_READING
_DURING_BACKWARDS
SRV_FAILURE_DURING_WRITING
_DURING_BACKWARDS
SRV_REEL_UNEXPECTED_ERROR_
DETECTED_MESSAGE_RECEIVED
SRV_REEL_NULL_FUNCTION_IN_
ERROR_MSG_TABLE
SRV_REEL_INVALID_MESSAGE_
RECEIVED_NOT_IN_TABLE
SRV_REEL_INVALID_STATE_
VARIABLE_OUT_OF_RANGE
SRV_TRACKING_FAILED_TO_
TIMEOUT
SRV_MOVETAPE_UNEXPECTED_
LPOS_RECIEVED_IN_CRUISE_CON
TROL
SRV_CLEAN_SCRUB_LENGTH_
MUST_BE_LESS_THAN_GOTO_LP
OS
SRV_MOVETAPE_TAPE_SPEED_
NOT_GREATER_THAN_ZERO_
AFTER_RAMP_UP
SRV_CMDPROC_INVALID_DRIVE_
STATE_ON_CLEAN_CMD
SRV_CMDPROC_OUT_OF_RANGE_
DRIVE_STATE_ON_CLEAN_CMD
LTO-2 SCSI Interface Guide
Sense
Key Category
47Ah Servo
47Bh Servo
47Ch Servo
47Dh Servo
47Eh Servo
47Fh Servo
480h Servo
481h Servo
482h Servo
483h Servo
484h Servo
485h Servo
Appendix A Message Codes
Description
Failure during reading during
backwards tracking.
Failure during writing during
backwards tracking.
An asynchronous error detected
message was received in a state that
would normal
A null function in the error handling
function lookup was undefined.
A message that does not have an
entry in the table look up was
received
The state variable is out of range.
Tracking code fails to respond after
failure to track.
An LPOS reel notification was
received in the cruise control state
that was not
Error because goto lpos - scrub lpos
length is less than 0
After ramp up speed is not greater
than zero
Cannot execute clean command at
current drive state
Unknown or out of range drive state
for clean command
365