Quantum LTO 2 User Manual page 352

Status Name
SRV_STEP_THREAD_TAPE_
ERROR19
SRV_STEP_PWR_RECOVERY_
LOAD_CART_ERROR5
SRV_STEP_PWR_RECOVERY_
LOAD_CART_EXPECTED_TRAY_
OUT
SRV_STEP_THREAD_TAPE_ERROR22
SRV_STEP_THREAD_TAPE_ERROR23
SRV_STEP_THREAD_TAPE_DEFAULT
SRV_STEP_PWR_RECOVERY_
LOAD_CART_ERROR7
SRV_STEP_UNTHREAD_TAPE_
ERROR2
SRV_STEP_PWR_RECOVERY_
LOAD_CART_ERROR8
SRV_STEP_PWR_RECOVERY_
LOAD_CART_DEFAULT
SRV_STEP_UNTHREAD_TAPE_
ERROR6
SRV_STEP_UNTHREAD_TAPE_
ERROR7
SRV_STEP_LOAD_CART_ERROR5
LTO-2 SCSI Interface Guide
Sense
Key Category
27Ah Servo
27Bh Servo
27Ch Servo
27Dh Servo
27Eh Servo
27Fh Servo
280h Servo
281h Servo
282h Servo
283h Servo
284h Servo
285h Servo
286h Servo
Appendix A Message Codes
Description
Expecting SNS7.
Expecting steps done.
Expecting SNS2 low.
Load arm Motor stalled while
finishing a thread operation.
Cartridge reel Motor did not move as
much as expected.
An unexpected state occurred in the
tape thread task.
Expecting steps done.
Motor stall.
Expecting EEPROM done.
Invalid state in
srv_dcl_loadCartridgePoweronRecov
ery function.
Load arm stalled while leaving the
hub .
Expecting steps done.
Expecting serial EEPROM done.
328