Quantum LTO 2 User Manual page 232

Table 181 REPORT DENSITY
SUPPORT Data Block
Descriptor – Field Descriptions
LTO-2 SCSI Interface Guide
Field Bytes
Primary 0
Density
Code
Secondary 1
Density
Code
WRTOK 2
DUP 2
DEFLT 2
Bits per 5-7
mm
Media 8-9
Width
REPORT DENSITY SUPPORT Command
Bits Description
40h indicating Ultrium 1
42h indicating Ultrium 2
40h, indicating Ultrium 1
42h indicating Ultrium 2
7 0 = Writing to a medium with this
density is not supported.
1 = Writing to a medium with this
density is supported.
6 0 = The primary density code occurs in
exactly one density support data block
descriptor.
1 = The primary density code occurs in
more than one density support data
block descriptor.
5 0 = Not the default density of the drive.
1 = The default density of the drive.
4880 for Ultrium 1 and 7398 for
Ultrium 2
127
Chapter 2 SCSI Commands
208