Quantum LTO 2 User Manual page 358

Status Name
SRV_UNTHREAD_STALL_WHILE_
PUTTING_AWAY_PIN
SRV_STEP_UNTHREAD_TAPE_
ERROR19
SRV_CMDPROC_EJECT_REJECTED
_TAPE_MOVING
SRV_REEL_UNEXPECTED_
MESSAGE_IN_USER_ABORT_REEL
_STATE
SRV_REEL_UNEXPECTED_
MESSAGE_IN_ERROR_ABORT_
REEL_STATE
SRV_REEL_UNEXPECTED_
MESSAGE_IN_USER_ABORT_TAPE
_STATE
SRV_STEP_RETRY2_ERROR1
SRV_STEP_RETRY2_ERROR2
SRV_STEP_RETRY2_ERROR3
SRV_STEP_RETRY2_ERROR4
SRV_STEP_RETRY2_ERROR5
SRV_STEP_RETRY2_ERROR6
SRV_STEP_RETRY2_ERROR7
SRV_STEP_RETRY2_ERROR8
SRV_STEP_RETRY2_ERROR9
SRV_STEP_RETRY2_ERROR10
LTO-2 SCSI Interface Guide
Sense
Key Category
2CDh Servo
2CEh Servo
2CFh Servo
2D0h Servo
2D1h Servo
2D2h Servo
2D3h Servo
2D4h Servo
2D5h Servo
2D6h Servo
2D7h Servo
2D8h Servo
2D9h Servo
2DAh Servo
2DBh Servo
2DCh Servo
Appendix A Message Codes
Description
Motor stall waiting for SNS7 high
while parking.
Expecting SNS7 high (park).
command rejected by
EJECT
command processor.
Unexpected message received in user
abort reel state of reel task.
Unexpected message received in error
abort reel state of reel task.
Unexpected message received in user
abort tape state of reel task.
Motor stall waiting for HALT3.
Expecting steps done.
Expecting SNS13 low.
Expecting steps done.
Failed to remove slack.
The Load Arm failed while moving to
home position (in front of the guides)
during...
Motor stall waiting for HALT4.
Expecting steps done.
Motor stall waiting for HALT4.
Expecting steps done.
334