Quantum LTO 2 User Manual page 363

Status Name
SRV_STEP_RETRY5_ERROR10
SRV_STEP_UNLOAD_CART_
ERROR3
SRV_RECOVER_BIN_ERROR
SRV_RECOVER_EEPROM_
DEFAULT
SRV_TEST_SEEP_DEFAULT
SRV_STEP_NO_ACTIVE_
FUNCTION_FOR_EEPROM_TASK
SRV_SERIAL_EEPROM_ERROR
SRV_STEP_THREAD_TAPE_ERROR
27
SRV_STEP_RETRY2_ERROR13
SRV_STEP_RETRY2_ERROR14
SRV_STEP_RETRY7_ERROR1
SRV_STEP_RETRY7_ERROR2
SRV_STEP_RETRY7_DEFAULT
SRV_STEP_THREAD_TAPE_
ERROR28
SRV_STEP_THREAD_TAPE_
ERROR29
SRV_STEP_THREAD_TAPE_
ERROR30
LTO-2 SCSI Interface Guide
Sense
Key Category
31Ch Servo
31Dh Servo
31Eh Servo
31Fh Servo
320h Servo
321h Servo
322h Servo
323h Servo
324h Servo
325h Servo
326h Servo
327h Servo
328h Servo
329h Servo
32Ah Servo
32Bh Servo
Appendix A Message Codes
Description
Expected STEPS_DONE.
Expecting EEPROM done.
An unspecified error occurred while
accessing the serial EEPROM.
Invalid state in the
recover_drive_state function.
Invalid state in the test_seep function.
No command handler was installed
to handle completion fro
EEPROM_TSK.
Expect good status fro serial
EEPROM task.
Expecting EEPROM done.
Motor stall waiting for HALT4.
Expecting steps done.
Motor stall waiting for steps done.
Expected STEPS_DONE.
Invalid state in
srv_dcl_retry_failed_park function.
Reel Motor stalled adding slack.
Unexpected error adding slack.
Reel Motor stalled removing added
slack.
339