Quantum LTO 2 User Manual page 65

Field Bytes
Sync
Linked
CmdQue
VS
Vendor 8-15
Identification
Product 16-31
Identification
Product 32-35
Revision
Level
Vendor 36-55
Specific
Clocking 56
QAS 56
IUS 56
Version 58-73
Descriptors
Obsolete
Reserved
LTO-2 SCSI Interface Guide
Bits Description
7 4 1 = Synchronous Transfer is supported
7 3 Always 0, indicating Linked Command is not supported.
7 1 0 = Command queuing is not supported
1 = Command queuing is supported
7 0 Always 0, indicating this feature is not supported.
8 bytes of ASCII data: "CERTANCE".
16 bytes of ASCII data: "ULTRIUM 2" followed by 7 spaces.
4 bytes of ASCII data indicating the SCSI firmware version.
This field may contain additional vendor specific information.
2-3 Always 3, indicating that single transition and double transition are
supported.
1 Always 0, indicating that quick arbitration and selection are not
supported.
0 Always 0, indicating that information unit transfers are not
supported.
8 sets of 2-byte descriptors indicating conformance to up to eight
standards. Reference SPC-3 for a listing of descriptor values.
Always 0
Always 0
Chapter 2 SCSI Commands
INQUIRY Command
41