Quantum LTO 2 User Manual page 40

LTO-2 SCSI Interface Guide
The applicable ANSI standards are as follows:
Automation/Drive Interface – Commands (ADC)INCITS 403-2005
Automation/Drive Interface – Commands (ADC-2) in development
Automation/Drive Interface – Transport Protocol (ADT) INCITS 406-
2005
Automation/Drive Interface – Transport Protocol - 2 (ADT-2) in
development
SCSI-3 Architecture Model (SAM) X3.270:1996
SCSI Architecture Model - 2 (SAM-2) INCITS.366:2003
SCSI Architecture Model - 3 (SAM-3) INCITS 402-2005
SCSI Architecture Model - 4 (SAM-4) in development
SCSI Parallel Interface - 3 (SPI-3) NCITS.336:2000
SCSI-3 Primary Commands (SPC) Status: X3.301:1997
SCSI Primary Commands - 2 (SPC-2) NCITS 351-2001:2001
SCSI Primary Commands - 3 (SPC-3) INCITS 408-2005
SCSI Primary Commands - 4 (SPC-4) in development
SCSI-3 Medium Changer Commands (SMC) NCITS.314:1998
SCSI Medium Changer Commands - 2 (SMC-2) INCITS 382-2004
SCSI Medium Changer Commands - 3 (SMC-3) in development
SCSI-3 Stream Commands (SSC) NCITS 335:2000
SCSI Stream Commands - 2 (SSC-2) INCITS 380-2003
SCSI Stream Commands - 3 (SSC-3) in development
The term SCSI is used wherever it is not necessary to
Note:
distinguish between the versions of SCSI.
Chapter 1 SCSI Interface
Standards Conformance
16