Quantum LTO 2 User Manual page 247

Sense
Key ASC
Byte 2 Byte 12
01h Recovered Error
01h 37h
01h 3Fh
01h 5Dh
01h 5Dh
02h Not Ready
02h 04h
02h 04h
02h 04h
02h 04h
LTO-2 SCSI Interface Guide
ASCQ
Byte 13 Message
00h Rounded parameter
00h Target operation
conditions have
changed.
00h Failure prediction
threshold exceeded
FFh Failure prediction
threshold exceeded
(false)
00h Logical unit not
ready cause not
reportable
01h Logical unit is in
process of becoming
ready
02h Logical unit not
ready, initializing
command required
03h Logical unit not
ready, manual
intervention
required
REQUEST SENSE Command
Explanation
A or
SET CAPACITY MODE SELECT
parameter has been rounded to a value within
the normal operating parameters of the drive.
Cartridge Memory inquiry failure detected.
Failure Prediction thresholds have been
exceeded indicating that a failure may occur
soon.
Test condition set to report Failure Prediction
threshold.
A tape is present in the drive; it is in the
process of being unloaded.
A medium access command has been received
during a front panel initiated
immediate reported
LOAD
A tape is present in the drive, but is not
logically loaded. A
LOAD
required.
A tape in the drive must be ejected.
Chapter 2 SCSI Commands
command
or an
LOAD
command.
command is
223