Log Pages; Table 57 Log Page Header - Data Format - Quantum LTO 2 User Manual

Log Pages

Table 57 Log Page Header —
Data Format
LTO-2 SCSI Interface Guide
Field Bytes
Reserved
Control 9
Pages 00h, 0Ch, 14h, 16h, 30h, 31h, and 33h, 3Ah, and 3Ch
Note:
cannot be reset by
The drive does not maintain a separate set of log parameters for each
initiator. Therefore, a
The subsequent section discusses the
Note:
The log page codes and the log parameter codes are described
in that section.
A log page is made up of a 4-byte page header and one or more log
2
parameters.
The following table shows the log page header format.
Bits 7
Byte
Reserved
0
1
(MSB)
2–3
Bits Description
All reserved bits must be 0.
See Control Byte Format on page
LOG SELECT.
command affects all initiators.
LOG SELECT
6 5 4
Reserved
Page Length, MSB
Chapter 2 SCSI Commands
LOG SELECT Command
29.
command.
LOG SENSE
3 2 1
Page Code
0
(LSB)
75