Completion Status; Table 187 Report Luns Completion Status - Quantum LTO 2 User Manual

Completion Status

Table 187 REPORT LUNS
Completion Status
LTO-2 SCSI Interface Guide
Table 187 shows the completion codes and messages for the
2
command.
LUNS
Code Message
00h Good Status
02h Check
Condition
Chapter 2 SCSI Commands
REPORT LUNS Command
Description
• The drive is ready to perform any
appropriate command.
• The drive remains in any previously
set mode.
• The drive accepts commands from
any Initiator.
• The tape position is not changed.
Use the
REQUEST SENSE
retrieve status information. Possible
Sense Keys are:
Code Message
04h Hardware
Error
05h Illegal
Request
06h Unit
Attention
REPORT
command to
Description
Parity error on
the SCSI bus or
drive hardware
failure.
The Command
Descriptor Block
is invalid.
The cartridge
was changed, or
the drive was
reset prior to this
command.
214