Quantum LTO 2 User Manual page 474

Status Name
SRV_UNTHREAD_UNPICK_
EXCEEDED_RETRIES
SRV_REEL_SCREEN_TEST_
REJECTED_CART_INSERTED
SRV_REEL_SCREEN_TEST_BOTH_
MOTORS_FAILED
SRV_REEL_SCREEN_TEST_DRIVE_
MOTOR_FAILED
SRV_REEL_SCREEN_TEST_CART_
MOTOR_FAILED
SRV_CMDPROC_MFR_DATA_NOT
_AVAILABLE_CHECKSUM_BAD
SRV_THREAD_STALL_NEAR_PIN_
GRABBER_MOVER
SRV_THREAD_STALL_NEAR_
GUIDES
SRV_THREAD_STALL_NEAR_HEAD
SRV_THREAD_STALL_PAST_HEAD
TAPE_MFR_DATA_MISMATCH
TAPE_CART_TYPE_MISMATCH
TAPE_FORMAT_TYPE_MISMATCH
LTO-2 SCSI Interface Guide
Sense
Key Category
903h Servo
904h Servo
905h Servo
906h Servo
907h Servo
908h Servo
909h Servo
90Ah Servo
90Bh Servo
90Ch Servo
90Dh Tape
90Eh Tape
90Fh Tape
Appendix A Message Codes
Description
Unable to unpick cartridge pin.
Reel Motor screen test rejected
because cartridge is inserted.
Both the drive Motor and cart Motor
failed the screen test.
Drive Motor failed the screen test,
while cart Motor passed.
Cart Motor failed the screen test,
while drive Motor passed.
Thread stalled near Pin Grabber
Mover.
Thread stalled near First Guides.
Thread stalled near Head.
Thread Stalled between the Head and
the Drive Hub.
Auto Load detect Mfr Data from
Servo and CM not match.
Byte 0 bit 5 of CM Cart Mfr Info not
match with Servo Writer cartridge
type.
Byte 0 bit 5 of CM Initialization Data
not match with Servo Writer cartridge
type.
450