Quantum LTO 2 User Manual page 20

Conventions Used
In This Manual
0
LTO-2 SCSI Interface Guide
supported by the LTO-2 tape drive. Each command is described, its
Command Descriptor Block (CDB) is illustrated, and the Completion
Status is given.
• Appendix A, Message Codes
This guide concludes with an index.
This manual uses the following conventions:
• Notes:
Notes emphasize important information related to the
Note:
main topic.
• All binary numbers are succeeded by "b"
• All hexadecimal numbers are succeeded by "h"
• Error or attention conditions are represented in parenthesis that
translate as follows:
(SK=S ASC=AA ASCQ=QQ)
where:
= hexadecimal sense key value
S
= hexadecimal additional sense code
AA
= hexadecimal additional sense code qualifier
QQ
Preface
xx