Quantum LTO 2 User Manual page 382

Status Name
SRV_CMDPROC_MANUFACTURER
_ID_NOT_AVAILABLE
SRV_CMDPROC_LP1_NOT_
AVAILABLE
SRV_CMDPROC_MFR_DATA_NOT
_AVAILABLE_TAPE_NOT_READ
SRV_CMDPROC_MFR_DATA_NOT
_AVAILABLE_TAPE_NOT_READY
SRV_SEQ_LOOP_UNDERRUN_
CONDITION_IN_TABLE
SRV_REEL_SETTENSION_API_
FAILED_DURING_WRAP
SRV_BAD_PES_VALUES
SRV_CMDPROC_HEAD_OFFSET_
NOT_ZERO_IN_WRITE_MODE
SRV_EXCEPT_RETURN_FROM_
RTOS
SRV_TRACKING_NEVER_CALLED
SRV_NEVER_SAW_SERVO_
SIGNAL
SRV_SERVO_SIGNALS_NOT_
WITHIN_ACQUIRING_WINDOW
SRV_FAILURE_DURING_
TRACKING_RAMPING
SRV_FAILURE_DURING_
TRACKING_SETTLING
LTO-2 SCSI Interface Guide
Sense
Key Category
41Eh Servo
41Fh Servo
420h Servo
421h Servo
422h Servo
423h Servo
424h Servo
425h Servo
426h Servo
427h Servo
428h Servo
429h Servo
42Ah Servo
42Bh Servo
Appendix A Message Codes
Description
Manufacturer ID not available
LP1 value not available
Manufacturer ID not available.
Manufacturer data not available
Loop in sequencer table detected an
invalid condition of current state
Settension API call failed during wrap
tape operation
Head offset is not zero while writing.
Return from RTOS. Should never go
here.
358