Completion Status; Table 221 Verify Command Completion Status - Quantum LTO 2 User Manual

Completion Status

Table 221 VERIFY Command
Completion Status
LTO-2 SCSI Interface Guide
Table 221 shows the completion codes and messages for the
2
command.
Code Message
00h Good Status
02h Check
Condition
Chapter 2 SCSI Commands
Description
• The drive is ready to perform any
appropriate command.
• The drive remains in any previously
set mode.
• The tape is positioned on the EOT side
of the last block verified.
Use the
REQUEST SENSE
retrieve status information. Possible
Sense Keys are:
Code Message
02h Not Ready
03h Media Error
04h Hardware
Error
05h Illegal
Request
VERIFY Command
VERIFY
command to
Description
No cartridge is
inserted in the
drive.
Unrecoverable
data error
encountered.
Parity error on
the SCSI bus or
drive hardware
failure.
The Command
Descriptor Block
is invalid.
270