Table 161 Read Position Data - Long And Tclp Bits Set To 1 - Field Descriptions - Quantum LTO 2 User Manual

Table 161 READ POSITION
Data — Long and TCLP Bits
Set To 1 — Field Descriptions
LTO-2 SCSI Interface Guide
Field Bytes
BOP 0
EOP 0
MPU 0
BPU 0
Partition 4-7
Number
Block 8-15
Number
File 16-23
Number
Set 24-31
Number
Reserved
Bits Description
7 0 = The current logical position is not at
BOT.
1 = The current logical position is at
Beginning-of-Partition (BOT).
6 0 = The current logical position is not
between early-warning and end-of-tape.
1 = The current logical position is
between early-warning and end-of-tape.
3 0 = File Number field is valid.
1 = File Number field is invalid.
2 0 = Block Number field is valid.
1 = Block Number field is invalid.
This field is always 0.
This field indicates the number of
logical blocks including filemarks
between beginning-of-medium and the
current logical position.
This field indicates the number of
filemarks between beginning-of-
medium and the current logical
position.
This field is always 0.
All bits are 0.
Chapter 2 SCSI Commands
READ POSITION Command
192